Logo printing on golf balls is done via pad printing for most applications. Pad printing transfers ink from a silicone pad onto the curved ball surface, allowing precise logo placement and color matching. Stamping (hot stamping or foil stamping) is available for specific artwork styles that require a metallic or embossed finish.
Logo files should be provided in vector format (AI, EPS, or SVG) for best results. Raster files (PNG, JPG) are accepted if the resolution is sufficient for the print size (minimum 300 DPI at the final print size). Color specifications should be provided as Pantone (PMS) codes. If you provide a CMYK or RGB color value, the factory will attempt to match it to the nearest available Pantone color, but an exact match is not always achievable without a confirmed sample review. For critical brand colors, always specify the Pantone code and request a pre-production sample.
Standard logo placement is on one side of the ball, centered on the equator. The standard print area is approximately 25mm × 15mm, depending on the logo shape. Larger print areas are available for specific artwork styles. Ball number placement is typically below the logo. Alignment line placement is on the opposite side of the ball from the logo.
Standard pad printing supports up to 4 colors per logo. Single-color logos are the most cost-efficient. Multi-color logos require separate printing passes for each color and may affect lead time. Metallic colors (gold, silver) are available via stamping. Neon and fluorescent colors are available via pad printing with specialty inks.
All logo artwork is confirmed during the sample stage before bulk production begins. The sample allows you to verify logo print quality, color accuracy, and placement before approving the final specification. Changes to artwork after sample approval may affect lead time and cost.
For artwork questions, contact us. Related: Packaging FAQ | Request a Sample | Logo Artwork Files Guide.